Yong Sun

Professor Yong Sun

Job: Professor

Faculty: Computing, Engineering and Media

School/department: School of Engineering and Sustainable Development

Research group(s): Solid Mechanics and Materials Research Group, Institute of Engineering Sciences

Address: 羞羞视频, The Gateway, Leicester, LE1 9BH, United Kingdom

T: +44 (0)116 257 7072

E: ysun01@dmu.ac.uk

Close all sections

Open all sections

Research group affiliations

Solid Mechanics and Materials Research Group (Leader)

Institute of Engineering Sciences (IES)

Publications and outputs

dc.title: Laser Surface Engineering for Tribology dc.contributor.author: Ji, Xiulin; Sun, Yong dc.description.abstract: This book is a reprint of the Special Issue Laser Surface Engineering for Tribology that was published in Lubricants dc.description: Tribology grapples with diverse challenges, seeking to minimize friction and wear, and to advance the energy efficiency and sustainability of machinery. Laser surface engineering emerges as a highly effective solution with which to tackle these challenges. Recent advancements in this field, including techniques like laser texture, laser deposition, laser cladding, and laser modification, have found widespread applications in tribology. Surface-strengthening coatings, prepared via laser manufacturing, stand out as one of the most efficient strategies to mitigate tribological issues. The laser processing-related techniques either alter the surface texture or create a new film, thereby enhancing the mechanical, physical, and chemical properties of the contact surfaces. These innovations have seamlessly integrated into various industrial applications. This comprehensive reprint encompasses surface texturing, laser processing, and post-machining. Various metals, such as cast iron, steel, high-entropy alloy, and Ti-based, Cu-based, Al-based, and Ni-based alloys, are explored in this reprint, with a dedicated focus on leveraging laser surface engineering for tribological enhancements. In the pursuit of ongoing advancements in this field, contributors participate in this reprint, encompassing the domains of laser surface engineering and tribology, in order to delve into and share their insights. We anticipate that this reprint will draw attention to key research trends and state-of-the-art developments in laser surface engineering for tribology.
dc.title: Special issue on Laser surface engineering for tribology dc.contributor.author: Ji, Xiulin; Sun, Yong dc.description.abstract: This Special Issue compiles significant contributions addressing challenges in laser surface engineering for tribology, suggesting a future research focus on application-specific optimization. This involves tailoring laser surface engineering approaches to meet the diverse requirements of various industries, including automotive, aerospace, and manufacturing. Additionally, the utilization of advanced characterization techniques like in situ microscopy and spectroscopy is advantageous for a deeper understanding of dynamic changes in laser-modified surfaces during tribological testing. These proposed research directions aim to further advance laser surface engineering for tribological applications, tackling current challenges and enhancing the practical implementation of these techniques. dc.description: open access article
dc.title: Corrosive-wear performance of grade 316 stainless steel sliding against grade 316 stainless steel in NaCl solution dc.contributor.author: Bailey, Richard; Sun, Yong dc.description.abstract: Most of the reported corrosive-wear or tribocorrosion tests have been carried out using an inert and insulating counter-body in the experimental set up, with the purpose of eliminating the direct contribution of the counter-body to the electrochemical response during sliding wear. Little work has been reported using the same material as the test specimen and as the counter-body. In this work, corrosive-wear experiments have been carried out on the same material contact, i.e., stainless steel on stainless steel (SS-SS), where a 316 SS specimen was sliding against a 316 SS slider in 0.5 M NaCl solution under controlled electrochemical conditions. For comparison purpose, similar experiments have also been conducted on the 316 SS-Al2O3 sliding pair. The tests were conducted under reciprocating sliding conditions at 1 Hz frequency, 4 N load and for a duration of 7200 s, incorporated with electrochemical control which included potentiodynamic polarization and potentiostatic polarization at constant negative and positive potentials with respect to the open circuit potential (OCP). The results show that the counter-body has a large effect on the corrosive-wear behaviour of the 316 SS specimen under all test conditions. As compared to the SS-Al2O3 sliding pair, the SS-SS pair experiences larger material removal from the specimen. Adhesive wear occurs in the SS-SS pair which leads to significantly roughened sliding surfaces and unstable frictional behavior and electrochemical response. Further analysis revealed that mechanical wear plays a more dominant role in material removal in the SS-SS pair than in the SS-Al2O3 pair, and it is the corrosion-accelerated wear that contributes to the significantly increased material removal in the SS-SS pair. dc.description: The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.
dc.title: Effect of thermal oxidation on the dry sliding friction and wear behaviour of CP鈥慣i on CP鈥慣i tribopairs dc.contributor.author: Sun, Yong; Bailey, Richard; Zhang, Jin; Lian, Yong; Ji, Xiulin dc.description.abstract: Thermal oxidation (TO) has proven to be a cost-effective and efficient technique to engineer the surfaces of titanium and its alloys to achieve enhanced surface properties. The benefits of TO treatment in enhancing the tribological properties of titanium have been demonstrated by many investigators. However, most of the reported tribological studies have been based on the contact between a TO treated titanium specimen and a counter-body made of other materials, mainly ceramics, steels and polymers. Very few studies have been reported on the friction and wear behaviour of TO treated titanium sliding against TO treated titanium. In this work, the effect of thermal oxidation on the dry sliding friction and wear behaviour of commercially pure Ti (CP-Ti) on CP-Ti tribopairs was investigated under loading conditions ranging from elastic contact to plastic contact. Comparisons were made among three contact pairs: (1) untreated Ti on untreated Ti (Ti鈥揟i), (2) untreated Ti on TO treated Ti (Ti-TO) and (3) TO treated Ti on TO treated Ti (TO-TO). The results show that the TO-TO contact pair presents an ideal material combination to achieve the best tribological performance in terms of low friction and superior wear resistance. On the other hand, the Ti鈥揟i pair presents the worst combination in terms of tribological performance. While the Ti-TO pair performs better than the Ti鈥� Ti pair tribologically, it is not as good as the TO-TO pair. It is essential to thermally oxidize both specimens in order to achieve optimal tribological performance. It is the oxide layer-on-oxide layer contact that imparts the excellent tribological performance. Failure of the oxide layer in one of the contact bodies can lead to high and unstable friction and increased wear from both contacting bodies. The tribological performance of the three contact pairs and the failure mechanism of the oxide layer are discussed in the paper. The results of this work suggest that the TO treated Ti on TO treated Ti contact pair would have potential tribological applications in engineering. dc.description: open access article
dc.title: Surface Engineering & Coating Technologies for Corrosion and Tribocorrosion Resistance dc.contributor.author: Sun, Yong dc.description.abstract: The corrosion of materials leads to about 3 to 4% economic losses of GDP in an industrial nation and also significantly contributes to greenhouse emissions and climate change, as the production of materials is one of the largest greenhouse emitters. Corroded material replacement leads to increasing demands in materials production. Therefore, from economic and environmental points of view, it is highly necessary and important to enhance the corrosion and tribocorrosion resistance of materials. Since corrosion and tribocorrosion are surface- and subsurface-related material degradation phenomena, surface engineering and coating technologies are the most effective to tackle such problems. This reprint is a collection of the papers published in the Special Issue 鈥淪urface engineering & coatings technologies for corrosion and tribocorrosion resistance鈥� in the Materials journal. The Special Issue aims to collate the latest developments in this technologically, economically, and environmentally important area. It provides a forum for researchers to share their original work or insight reviews in this field. This reprint contains an Editorial by the Guest Editor and 12 original research papers and reviews related to this topic contributed by researchers from around the globe. The editor acknowledges the contributions of all the authors and the Editorial team in making this Special Issue a success dc.description: This is a reprint of articles from the Special Issue published online in the open access journal Materials (ISSN 1996-1944) (available at: www.mdpi.com/journal/materials/special_issues/Surface_ Tribocorrosion)
dc.title: Surface Engineering & Coating Technologies for Corrosion and Tribocorrosion Resistance dc.contributor.author: Sun, Yong dc.description: open access article
dc.title: Tribocorrosion Behavior of 纬鈥�-Fe4N Nitride Layer Formed on Mild Steel by Plasma Nitriding in Chloride-Containing Solution dc.contributor.author: Sun, Yong; Richard, Bailey dc.description.abstract: Nitriding has long been used to engineer the surfaces of engineering steels to improve their surface and subsurface properties. The role of the surface compound layer (飦р€�-Fe4N and/or 飦�-Fe2-3N) in improving the tribological and corrosion resistant properties of nitrided steels has been established. However, there have been very few studies on the response of the compound layer to tribocorrosion in corrosive environments. In this work, the tribocorrosion behaviour of a 5 飦璵 thick 飦р€�-Fe4N nitride layer produced on mild steel (MS) by plasma nitriding has been studied in a NaCl containing so-lution under various electrochemical conditions. The results show that at a cathodic potential of -700 mV (saturated calomel electrode, SCE), where mechanical wear is predominant, the total material removal (TMR) from the 飦р€�-Fe4N layer is 37% smaller than that from the untreated MS, and at open circuit potential, TMR from the layer is 34% smaller than that from the untreated MS, while at an anodic potential of -200 (SCE), the 飦р€�-Fe4N layer can reduce TMR from mild steel by 87%. The beneficial effect of the 飦р€�-Fe4N nitride layer in improving the tribocorrosion behavior of mild steel is derived from its high hardness and good corrosion resistance in the test solution and its ability resist both mechanical wear and corrosion and to reduce wear-corrosion synergism. dc.description: open access article
dc.title: Comparison of wear performance of low temperature nitrided and carburized 316L stainless steel under dry sliding and corrosive-wear conditions dc.contributor.author: Sun, Yong; Bailey, Richard dc.description.abstract: 316L austenitic stainless steel was plasma nitrided and carburized at low temperatures to produce precipitation-free nitrided and carburized layers, respectively. The reciprocation sliding wear performances of the untreated, nitrided and carburized specimens were compared under both unlubricated (dry) and corrosive (in 0.5M H2SO4 solution) conditions. The results show that under dry sliding conditions, both the nitrided layer and carburized layer can offer good wear resistance to 316L steel. The total material loss (TML) of the steel is reduced by more than two orders of magnitude by low temperature nitriding, while low temperature carburizing offers a reduction in TML by an order of magnitude. The better dry sliding wear performance of the nitrided layer is attributed to its much higher hardness as compared to the carburized layer. However, under corrosive-wear conditions in 0.5 M H2SO4 solution, the wear performance of the nitrided layer is significantly deteriorated, with TML 100% higher than that of the untreated 316L steel. On the other hand, the carburized layer can still offer good wear resistance in the corrosive environment, with a reduction in TML of 316L steel by 40%. This research has practical implication that low temperature nitriding is the most suitable for applications in dry and non-corrosive environments, while low temperature carburizing is more suitable for applications in H2SO4-containing corrosive environments. dc.description: The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.
dc.title: Tribocorrosion performance of 316L stainless steel enhanced by laser clad 2-layer coating using Fe-based amorphous powder dc.contributor.author: Ji, Xiulin; Luo, Chanyuan; Jin, Juan; Zhang, Yingtao; Sun, Yong; Fu, Li dc.description.abstract: To improve the tribocorrosion performance of 316L stainless steel (SS), multi-layer (1, 2 and 3 layers) Fe-based alloy coatings were manufactured by laser cladding Fe-based amorphous powder on 316L SS, and the corrosive wear behavior was investigated against Alumina ball in Ringer's solution. With the increase of cladding layer number, the content of bodycentered cubic (BCC) phase increases, and the hardness also improved. The volume loss rate of SS at 5 N load decreased over 3 times by the 2-layer coating. Under 10 or 20 N loads, the 2-layer coating still presents the best tribocorrosion performance with the lowest values of friction coefficient and volume loss rate. The multi-layer cladding caused surface chemical composition change leading to the decrease of Cr accompanied with the increase of Mo and Y, which is responsible for the increase of BCC content and hardness as well as the formation of lubricant FeeCr hydroxide film. The friction induced lubricating film may facilitate to design new metallic coatings for the low carbon steels applied in corrosive environment. dc.description: open access article
dc.title: Effect of Applied Cathodic Potential on Friction and Wear Behavior of CoCrMo Alloy in NaCl Solution dc.contributor.author: Sun, Yong; Bailey, Richard dc.description.abstract: Most of the reported work on the effect of applied potential on tribocorrosion or corrosive wear of metallic alloys in a corrosive environment were conducted at anodic potentials. Limited tests have been conducted at cathodic potentials for comparison purposes or to derive the pure mechanical wear component in tribocorrosion. This work investigated the effect of cathodic potential on the friction and wear behaviour of an important biomedical alloy, CoCrMo, sliding against an Al2O3 slider in 0.9% NaCl solution at 37 C. High friction was found at cathodic potentials close to the open circuit potential, where mechanical wear played a predominant role in material removal. At potentials more cathodic than the hydrogen charging potential, low friction and low wear were observed. The coefficient of friction (COF) and total material loss decreased with increasing cathodic potential, such that at -1000 mV (saturated calomel electrode, SCE), extremely low COF values, as low as 0.02, and negligible material loss were obtained. Such reductions in friction and wear at increasing cathodic potentials were accompanied with the formation of parallel lines in the sliding track and were gradually diminished with increasing applied contact load. It is believed that hydrogen charging and hydrogen segregated layer formation at the surface are responsible for such a phenomenon. It can also be concluded that it is difficult to derive the pure mechanical wear component in tribocorrosion by simply conducting a test at an arbitrary cathodic potential. dc.description: open access article

Research interests/expertise

Surface Engineering & Coating Technologies for Tribological, Corrosion Resistance and Biomedical Applications

Characterisation of Surface Engineered Systems.

Plasma Nitriding of Ferrous and Non-ferrous Alloys

Duplex Treatments

Magnetron Sputter Deposition of Oxide, Boride and Nitride Coatings

Surface Engineering of Stainless Steels

Surface Nanocrystalline Materials

Finite Element Analysis

Tribology and Corrosion of Coatings

Tribocorrosion

Surface Engineering of Wear Components for Food Processing

Areas of teaching

Materials Science

Composite Materials

Engineering Science

Failure Analysis

Materials and Sustainability

Green Design

Design for manufacturing

Solid Mechanics

Qualifications

BSc, Ph.D

Courses taught

Mechanical Engineering BEng

Mechanical Engineering MSc

Membership of professional associations and societies

Member of ASM International and Affiliated Heat Treatment Society

Senior Fellow, HEA

Conference attendance

Thin Films'2018, July 2018, Shenzhen, China, invited speaker and session chair

The 8th International Conference on Plasma Surface Engineering AEPSE 2011: Invited Speaker and Session Chair, , Dalian, China, September 2011

Consultancy work

Area of expertise:

Surface treatments

Failure analysis

Materials selection

Previous consultations:

Generation 2 potato slicing blades: wear and failure analysis, Industrial consultant project for PepsiCo Inc., 2007

Surface treatments for potato slicing blades for improved lifespan, Industrial consultant project for PepsiCo Inc., 2008

Current research students

Mr. Hafiz M.A. Ali: PhD student, Second supervisor

Externally funded research grants information

The Royal Society-NSFC Costshare International Exchange, 2017-2019.

Internally funded research project information

羞羞视频 RIF funding, 2014, Development of a novel 2-dimensional sliding wear test facility.

羞羞视频 Research Capital Infrastructure Funding (RCIF): to develop the Materials Laboratory for teaching and surface engineering research, 2009

羞羞视频 Fee-only PhD scholarship Award: 2011

Published patents

Bell, Thomas and Sun, Yong: Process for the treatment of austenitic stainless steel articles

UK Patent ZSR455/Q036333PGB, 1997

United States Patent 6238490, May 29, 2001.

Professional esteem indicators

220+ publications

Citation: more than 7500 times

h-index: 48 (Google Scholar)

Editorial board member: Surface Technology

Editorial board member: Journal of Biomaterials

Editor: special issue "Tribocorrosion of Surface Engineered Materials", Lubricants (Journal), 2018-2019.

Editor: special issue "Surface Engineering & Coating Technologies for Corrosion and Tribocorrosion Resistance", Materials (Journal), 2020-2022.

Service as reviewer for the following international journals:

Surface and Coatings Technology
Surface Engineering
Corrosion Science
Journal of Materials Science
Materials & Design
Vacuum
Materials Chemistry and Physics
Journal of Physics and Chemistry of Solids
Proceedings of the Institute of Mechanical Engineers
Tribology International
Tribology Letters
Applied Surface Science
Iranian Journal of Engineering
Thin Solid Films
Wear
Materials
Lubricants

ORCID number

0000-0002-2489-8914